|
   #4533 Combination Pay-out and Take-up Reel
(For handling
aluminum wire and cable) The coils and cartons of aluminum are larger than
they are for copper. This reel is designed to take care of these large coils.
Inside coil diameter may vary from 17" minimum to 27" maximum.
Outside coil diameter is 37" with height of 12".
#902 - Plain Pa y-out Reel
This reel is made of hardwood, well braced and reinforced with sheet steel
throughout. It is especially suitable for gang mounting on a wagon, when
paying out several wires at one time. Reel pins also adjust for 12, 18 or 24
inch coils.
#900 - Heavy Type Barrow Reel
This reel was made for heavy wire and heavy work. It is made of hardwood,
well braced and reinforced with steel. A wide bearing, together with a long
pivot and sleeve allow the reel to turn easily no matter how heavy the coil
of wire on the reel. The small amount of friction developed by this bearing
does not prevent the reel from turning freely, and its purpose is to keep the
reel from paying out the wire too fast and tangling it. It is a high quality
reel. The reel pins adjust for 12, 18, and 24 inch coils.
 #3555 - Combination Pay-out Reel and Take-up Reel (For Copper Coils)
This reel is extremely light weight yet strong and durably constructed. The
frame is made of stout tubing. To add to the ease of portability, the guide
pins fold flat so that the reel is compact enough to carry or slide into a
truck or convert it easily from a pay-out to a take-up reel.
Two braces and a hand
crank are furnished to hold the reel in an upright position. The guide pins
are easily and quickly adjustable to take wire coils from 14" to
27" inside diameter.
The automatic brake is
another important feature. As the wire is pulled, the brake releases and the
wire pays out freely. The instant tension is
released the brake sets and any possibility of back-lash is prevented. One
man can tend to several reels.
|
